TOM TONE MUFFLE

Each roll is 6ft long and allows total customization of cutting the muffle to your preference. It's capable of being put on batter or resonant heads - clear or coated - top or bottom of the heads.

MUFFLE FAQ

Let's be real, there's not a one size fits all muffle. Almost every drum company has their own gel, tape, or weight in the industry and it's always the "Here's one kind to use for all the different drums." But wait, not every drum needs that exact same amount of muffling depending on the gig or heads. We wanted to customize our tone, whether that's cutting the muffle down or using more to make the sound exact to our preference.

Step 1: Select your drum

The smaller the drum the less muffle you need. Less is more since our muffle helps dampen the tone well with a minimum amount. Each roll is 6ft long so there’s plenty to cut. For your first time using it, if you're not sure how much you want to use start with less (you can always add more).

Step 2: Cut your length

We recommend 3 bass drum lengths to start off so you can hear the difference (see the 1st photo). The adhesive is very strong, if you apply it to the drum and then try to take it off and move it the adhesive more than likely will come off the muffle and you will have to recut a new piece. We recommend cutting the muffle with scissors and firmly applying it to the outside edge of the drum. Press on the muffle for a good 15-30 seconds to make sure it stays.

Step 3: DESTROY

You can use this muffle on any kind of tom drumhead, whether it's on the batter or resonant and coated or clear. We've had artists experiment with placing it underneath the reso and batter heads but most prefer on top of the batter head. You can place this anywhere on the head but near the tension rods (outer edge) keeps it from getting in the way like most mutes. We're working on a snare adhesive that doesn't come off as easy so this is just for the toms.

These usually last longer than the drumheads. Once it's put on the head, it's on and shouldn't be taken off and on. We do not recommend pulling them off and on since it will lose the strength of the adhesive.

This is available in 3 different thicknesses (Minimal, Moderate, and Maximum) and can be customized by cutting it to any desired length. It ships in 6 foot lengths and can be used in temperatures as high as 220°. What this does is allow you to muffle any size tom as much as you like without having to deal with the usual gel/tape getting dirty, coming off, and not lasting or having to use only one size type of muffle. Fair warning: this isn't a fast or easy muffle to use.

If you prefer the faster weights, dots, and covers we suggest being patient with trying this and start with 1 roll of moderate thickness. Once it’s on the head it’s made to stay so it’s not like the other reusable muffles, it’s made to last longer than the heads. This is specifically for only tom heads and we're in the process of making one for snares.